SS Scientific Ltd

Alcatel Pump Filter Kit  -  FK101

For all models of Alcatel Vacuum Pumps with NW25 flange.

The Pump Filter Kit for the Alcatel Pump includes the Oil Mist Eliminator, Koby Charcoal Trap and all the fittings needed to attach this two filter system to the NW25 fitting on the Alcatel series of vacuum pumps.  This kit is to be used with all Alcatel vacuum pumps with NW25 fittings on the exhaust port.  It can also be used with any other manufacturers pumps that have an NW25 flange type fitting on the exhaust port. 

FK101 FILTER KIT

 



  Koby Charcoal Filter

  NW25 Quick Clamp


1/4" to NW25 Adaptor

  Centering Ring
  

 

Oil Mist Eliminator

Centering Ring

Quick Connect Clamp

Horizontal Adaptor

Edwards Large Filter Kit  -  FK201

For Edwards Models E1M5/8, E2M2/3/5/8 and RV3/5/8 Pumps.

The Pump filter Kit for the Edwards Pump includes the Edwards EMF10 Oil Mist Eliminator, Koby Charcoal Trap and all the fittings needed to attach this two filter system on the larger Edwards series of vacuum pumps.  Included is the 3/4 Pump Adaptor which screws into the exhaust port of the vacuum pump.  The oil mist eliminator then attaches to the NW25 flange on this fitting. This kit is to be used with Edwards models E1M5/8, E2M2/3/5/8 and the RV3/5/8 series vacuum pumps.  It can also be used with any other manufacturers pumps that have an NW25 flange type fitting on the exhaust port. 

FK201 Filter Kit

 



  Koby Charcoal Filter

  NW25 Quick Clamp

  1/4" to NW25 Adaptor

  Centering Ring
 Oil Mist Eliminator

Centering Ring

Connect Clamp 3/4" Pump Adaptor
 

Edwards Smaller Filter Kit  -  FK251

For Edwards Models E2M0.7, E2M1 and E2M1.5 Pumps.

The Pump filter Kit for the Edwards Pump includes the Oil Mist Eliminator, Koby Charcoal Trap and all the fittings needed to attach this two filter system on the Edwards series of vacuum pumps.  Included is the 3/8 Pump Adaptor which screws into the exhaust port of the vacuum pump.  The oil mist eliminator then attaches to the NW10 flange on this fitting.  This kit is to be used with Edwards models E2M0.7, E2M1 and E2M1.5 vacuum pumps.  It can also be used with any other manufacturers pumps that have an NW10 flange type fitting on the exhaust port.

FK251 FILTER KIT

 


Koby Charcoal Filter

  NW16 Quick Clamp
  1/4" to NW10 Adaptor
 Centering Ring
Oil Mist Eliminator


Centering Ring
Connect Clamp Pump Adaptor